PCL-MB-050A臺式壓力校準 美國omega
可互換的模塊標準臺式壓力范圍
PCL-2A
1年保修
PCL-2A:臺式可互換的模塊標準范圍內的壓力
PCL-2A
插件提供壓模從0.25英寸靶道水7500 psi of to
雙顯示輸出simultaneously應用壓力和transducer shows
甚高精度全尺度的0.06 %）
措施的壓力，電流，電壓，漏流和
歐米茄?pcl-2a臺式/面板安裝系統介紹了壓力校準標準的一個新時代。這種獨特的儀器測量流量，壓力，真空，泄漏電流，測試電壓，開關和狀態的變化。一個設備齊全的pcl-2a系統提供所有的校準能力在幾乎所有的壓力測試應用程序所需要的。每個系統包括一個基座單元和一個或多個插件壓力模塊。壓力模塊陣列可以覆蓋從0.25英寸的H 2 O 7500 psi范圍。模塊可以互換，迅速和容易地不使用工具。選擇任何的模塊組合，滿足您的應用需求。該pcl-2a壓力校準測試系統結合了廣泛的選擇標準的固件功能模塊插件的壓力的能力。這種組合的固件相關的功能和無限的壓力傳感器的互換性使pcl-2a*強大的壓力校準和測試工具的今天。
規格
Available Accuracies (% of span compared to standard): ±0.07% of span (ranges below 1 in H 2 O) ±0.06% of span (from 0/1 through 0/200 in H2 O)±0.05% of span (psi ranges only)
Repeatability: * ranges 0/5 psi and above ±0.02% of span (typical) ranges 0/2 psi and below ±0.05% of span
Sensitivity: * + 0.002% of span with damping 1 part in 50,000 (max)( * included in accuracy specifications)
Operating Temp. Range: 0 to 49°C (32 to 120°F)
Compensated Temp. Range: -7 to 49°C (20 to 120°F)
Reference Temperature: 21°C ±1.7°C (70° ±3°F)
Temperature Error: maximum of ±0.007% of span per over the compensated range for zero and span
Storage Limits: -20 to 70°C (-4 to 158°F)
Display: Alphanumeric LCD, 9.4 mm (0.37") height per 2 lines, 16 characters/line
Display Update: 100 ms
Process Connection: 1 /8 NPT, internal thread
Electrical Connection: Miniature recessed banana jacks
Housing: Molded, high-impact ABS case, gray
Weight: Base unit: 1.3 kg (2.2 lb) Pressure Module: 0.3kg (0.5lb) each
Dimensions: 200 L x 108 W x 83 mm H (7.88 L x 4.24 W x 3.25" H) nominal
Power Supply: Internal: 9 Vdc batteries (2 required) included External: ac adaptor 9 Vdc, 500 mA
Portable Operation: 30 hours on two 9 Vdc alkaline batteries
產品型號 產品描述
PCL-2A 具有報警和數據記錄能力的臺式/面板安裝壓力校驗儀的基本單元（需要一個或多個壓力模塊單獨出售的插頭）
PCL-MA-01WC 0-1 In H2O plug in pressure module
PCL-MA-100WC 0-100 In H2O plug in pressure module
PCL-MB-015G 0-15 psig plug in pressure module
PCL-MB-015A 0-15 psia plug in pressure module
PCL-MB-050A 0-50 psia plug in pressure module
PCL-MB-100G 0-100 psig plug in pressure module
PCL-MB-3KG 0-3,000 psig plug in pressure module
PCL-MB-050A臺式壓力校準 美國omega
