熱電阻PR-21SL-3-100-A-1800-M12-1長
PR-21SL-3-100-A-1800-M12-1
壓簧壓RTD傳感器，帶M12連接器
PR-21SL-M12 Series
新產品!
簧壓RTD傳感器，帶M12連接器
PR-21SL-M12 Series:簧壓RTD傳感器，帶M12連接器
PR-21SL-3-100-A-0600-M12-1
M12 Connectors for Easy Assembly, No Tools Required. An M12 Extension Cable is Required for Installation.
Spring Loaded RTD Probes for Use in Thermowells, Insures Proper Tip Contact with Thermowell and Maximum Performance
4-Wire Class A PT100 RTDs, Can Be Used in Any 2, 3 or 4-Wire Application for Maximum Flexibility
Fits All Standard 0.260" Bore Thermowells (Note: Thermowell Not Included)
Probe Length = Thermowell Stem Length for Easy Selection (See Figure Below)
Adjustable Self Gripping Spring Allows For Use in Shorter Thermowells
Vibration Resistant to 10gs, 10-500Hz (MIL-STD-202G, Method 204D, Condition A) for 6" Length and Shorter
Can Be Combined With a Selection of Programmable and Fixed Range Transmitters
Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.
The Series PR-21SL Spring Loaded RTD has been designed to provide our customers with a simple, effective way to adapt our M12 enabled RTD probes for use in thermowells. To insure the best possible performance,
the PR-21SL RTD has a spring loading feature that maintains contact between the probe and thermowell under static and vibration conditions. This helps to maintain heat transfer between the thermowell and probe, as well as
dampening the effect of vibration on the sensor. With a demonstrated ability to withstand 10gs of vibration between 10 and 500HZ (for 6" long and shorter probes per MIL-STD-202G, Method 204D, Test Condition A), this probe has shown its ability to withstand real-world conditions.
To select the right length probe for your application, simply measure the depth of the bore in the thermowell (the length from the top of the thermowell to the bottom of the bore as shown as the “Thermowell Stem Length” in the sketch below).
The PR-21SL sensor assembly is designed to fit into a thermowell with a stem length equal to that specified in the model number. Simply slide the sensor assembly into the thermowell until bottomed and then compress the spring while
making the 1/2NPT connection. Thread sealant tape or thread compound may be used on the 1/2NPT mounting thread to insure easy removal at a later time. The position of the self-gripping spring can also be adjusted so that the sensor
can be used in a shorter thermowell, simply twist the spring while sliding it along the probe stem until the needed position is reached.
The PR-21SL can also be used as a back-up sensor for a variety of applications. The spring loading feature can be adjusted to fit a variety of thermowells. The spring loading fitting can be removed altogether and replaced with a compression
type fitting if a fixed mounting is needed. The probe (less spring and hex fitting) can also be used with one of Omega's M12-Handle accessories to turn your spring loaded probe into a hand-held probe. This flexibility in mounting options, as
well as the simplified and robust connection provided by the M12 connector, makes the PR-21SL the perfect solution for a wide variety of applications.
These RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements (see the wiring diagrams below) and using only those wires needed for your connection. This allows for simplified,
trouble free installation with any existing application. This also allows the PR-21 series sensor to be used for a wide variety of replacement applications since it can be connected as-is with just about any measurement or control equipment available.
When ordering your PR-21SL sensor, don't forget your extension cable. Omega offers a wide selection of extension cables including over molded PVC, LCP/PFA, Polyurethane and Silicone cables, as well as customized cables in a variety of
cable materials with optional stainless steel braid or hose for improved mechanical protection. Omega also offers a selection of programmable and fixed range transmitters fitted with M12 connections, and a wide selection of controllers, panel meters and other instruments to complete your measurement needs.
Specifications:
Metal Parts: 316L Stainless Steel Sheath and Housing.
Connector: 4-Pin "A"-Coded M12 Plug Connector.
Standard Probe Diameter: 1/4"
Standard Probe Lengths: See Thermowell Stem Lengths in The Order Table Below.
Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) Standard, Pt1000 and Other Options Available.
Accuracy: Class A Standard (per IEC 60751), Others Available Upon Request.
Temperature Range: -50 to 250°C Except for the Connector Which is 85°C Max.
Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient Temperature.
Vibration Resistance: 10gs from 10-500Hz per MIL-STD-202G, Method 204D, Test Condition A.
產品型號/產品描述
PR-21SL-3-100-A-0250-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 2.5" or Less.
PR-21SL-3-100-A-0400-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 4" or Less.
PR-21SL-3-100-A-0600-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 6" or Less.
PR-21SL-3-100-A-0900-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 9" or Less.
PR-21SL-3-100-A-1200-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 12" or Less.
PR-21SL-3-100-A-1500-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 15" or Less.
PR-21SL-3-100-A-1800-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 18" or Less.
PR-21SL-3-100-A-2400-M12-1 Spring Loaded RTD Sensor to Fit Thermowells with a Stem Length of 24" or Less.
Accessories
M12C-PVC-4-S-F-5 M12 Extension Cable, 4 Wire PVC Cable, Straight Socket Connector One End and Flying Leads the Other, 5 meters long
M12C-PVC-4-R-F-5 M12 Extension Cable, 4 Wire PVC Cable, Right Angled Socket Connector One End and Flying Leads the Other, 5 meters long
M12C-PUR-4-S-F-2 M12 Extension Cable, 4 Wire Polyurethane Cable, Straight Socket Connector One End and Flying Leads the Other, 2 meters long
M12C-PUR-4-S-F-5 M12 Extension Cable, 4 Wire Polyurethane Cable, Straight Socket Connector One End and Flying Leads the Other, 5 meters long
M12C-PUR-4-R-F-5 M12 Extension Cable, 4 Wire Polyurethane Cable, Right Angled Socket Connector One End and Flying Leads the Other, 5 meters long
1/2-260S-U21/2-304SS 304SS Thermowell, 1/2NPT Mounting Thread, Stem Length 4"
1/2-260S-U41/2-304SS 304SS Thermowell, 1/2NPT Mounting Thread, Stem Length 6"
1/2-260S-U71/2-304SS 304SS Thermowell, 1/2NPT Mounting Thread, Stem Length 9"
1/2-260S-U101/2-304SS 304SS Thermowell, 1/2NPT Mounting Thread, Stem Length 12"
產品型號說明
(1) (2)
PR-21SL-3-100-A
-M12
選項描述
(1) Length
選擇
-0250 代表 2 1/2in. Stem Length
-0400 代表 4in. Stem Length
-0600 代表 6in. Stem Length
-0900 代表 9in. Stem Length
-1200 代表 12in. Stem Length
-1500 代表 15in. Stem Length
-1800 代表 18in. Stem Length
-2400 代表 24in. Stem Length
(2) Wiring Orientation
選擇
-1 代表 Standard Wiring (See Diagram)
-2 代表 Optional Wiring (See Diagram)
PR-21SL-3-100-A-1800-M12-1
熱電阻PR-21SL-3-100-A-1800-M12-1長 相關產品
