FMA1716A-ST流量計 美國omega

經濟與清潔氣體氣體質量流量計顯示可選的積分換
FMA1700A_1800A Series
FMA1700A_1800A 系列：經濟flowmeters清潔氣體流量是顯示與可選的積分
FMA1828A
PLACE ORDER
1 year warranty NEW! CE
Reads Gas Mass Flow Without Temperature or Pressure Compensation
Available in Economical Aluminum or Corrosion- Resistant 316 SS
Tiltable LCD Display for Easy Reading
NIST Traceable Calibration Included
View related products - Electronic Mass Flowmeters
Click to scroll below to order See Specs PDF Manuals View a printer friendly page
The FMA1700A/1800A Series eletronic gas mass flowmeters provide for monitoring the flow of a wide variety of gases from 10 SCCM up to 1000 SLM. Utilizing heat transfer through a heated tube to measure molecular gas flow rate, the FMA1700A/1800A provides measurement of direct gas mass flow rate, without the need to compensate for variations in gas temperature or pressure (within stated limits). They are available in an economical aluminum/brass construction for typical gas flows and a 316 SS construction for applications requiring more corrosion resistance. The FMA1700A series without integral display is supplied with a field selectable analog 0 to 5 Vdc or 4 to 20 mA output for remote monitoring; the FMA1800A series has both an integral 3? digit display and analog output. The display is tiltable over 90 degrees for viewing convenience. The display is calibrated standard to read out directly in SCCM or SLM for nitrogen (other gas calibrations available on special order). Due to their low cost, digital display, analog output capability, and insensitivity to variations in gas temperature and pressure, the FMA1700A/1800A Series are ideal substitutes for many rotameter applications. When used with the FMA178BP portable battery pack, the FMA1800A Series are ideal for in-the-field calibration of flowmeters or testing of air sampling equipment. The FMA178BP battery pack includes batteries, recharger, and carrying case with shoulder strap and belt loop. With the FMA178BP, the flowmeter can operate in excess of 40 hours; the batteries can be recharged at least 200 times. The FMA1700A/1800A Series require 12 to 26 Vdc power @ 200 mA maximum, which can be supplied by the FMA178PW plug-in socket power supply. The electronics are reverse polarity protected and has externallyaccessible fusing. Model number FMA178C (supplied separately) provides a mating 9-pin “D” connector with 3 feet of ribbon cable for accessing the 0 to 5 Vdc output signal and power input connections (use FMA178C-MA for 4 to 20 mA output signal connection). The LCD supplied with the FMA1800A Series is connected to the lower electronics via a modular plug. The LCD can be remotely located by purchasing an FMA18RC remote cable assemblyyou must then build your own assembly for panel mounting the LCD.
SPECIFICATIONS
Accuracy: ±1.5% of full scale, including linearity over 15 to 25°C and 5 to 60 psia (0.35 to 4.2 kg/cm2)
Repeatability: ±0.5% of full scale and for units ≥100 scm from 0 to 20% of range
Temperature Coefficient: 0.15% of full scale per °C or better
Pressure Coefficient: 0.01% of full scale per psi (0.07 bar)
Response Time: 800 msec time constant; 2 seconds (typical) to within ±2% of set flow rate over 25 to 100% of full scale
Power Requirements:12 to 26 Vdc power @200 mA maximum
Maximum Gas Pressure: 500 psig (35 kg/cm2 gauge); 1000 psig (70 kg/cm2 gauge) for ranges upto 100 SLM; 20 psig optimum
Gas and Ambient Temperature: 0 to 50°C (0 to 122°F)
Leak Integrity: 1 x 10-9; std cc/sec of helium maximum to outside environment
Materials in Fluid Contact:
Aluminum models: Anodized aluminum, 316 SS, brass and FKM O-rings
Stainless Steel models: 316 SS and FKM O-rings
Output Signal
Linear 0 to 5 Vdc: 1000 Ω minimum load
4 to 20 mA: 50 to 250 Ω loop resistance
Transducer Power: 12 Vdc @ 200 mA maximum (FMA178PW)
Shipping Weight: 1.1 kg (2.5 lb)
Compliance: EN55011 class 1, class B; EN50082-1
 

產品型號  規格描述
Mass Flow Meters without Display, Aluminum/Brass Body
FMA1702A 0 to 10 SCCM range
FMA1704A 0 to 20 SCCM range
FMA1706A 0 to 50 SCCM range
FMA1708A 0 to 100 SCCM range
FMA1710A 0 to 200 SCCM range
FMA1712A 0 to 500 SCCM range
FMA1714A 0 to 1 SLM range
FMA1716A 0 to 2 SLM range
FMA1718A 0 to 5 SLM range
FMA1720A 0 to 10 SLM range
FMA1723A 0 to 15 SLM range
FMA1724A 0 to 20 SLM range
FMA1726A 0 to 30 SLM range
FMA1727A 0 to 40 SLM range
FMA1728A 0 to 50 SLM range
FMA1740A 0 to 60 SLM range
FMA1741A 0 to 80 SLM range
FMA1742A 0 to 100 SLM range
FMA1743A 0 to 200 SLM range
FMA1744A 0 to 500 SLM range
FMA1745A  *0 to 1000 SLM range
Mass Flow Meters without Display, Stainless Steel Body
FMA1702A-ST 0 to 10 SCCM range
FMA1704A-ST 0 to 20 SCCM range
FMA1706A-ST 0 to 50 SCCM range
FMA1708A-ST 0 to 100 SCCM range
FMA1710A-ST 0 to 200 SCCM range
FMA1712A-ST 0 to 500 SCCM range
FMA1714A-ST 0 to 1 SLM range
FMA1716A-ST 0 to 2 SLM range
FMA1718A-ST 0 to 5 SLM range
FMA1720A-ST 0 to 10 SLM range
FMA1723A-ST 0 to 15 SLM range
FMA1724A-ST 0 to 20 SLM range
FMA1726A-ST 0 to 30 SLM range
FMA1727A-ST 0 to 40 SLM range
FMA1728A-ST 0 to 50 SLM range
FMA1740A-ST 0 to 60 SLM range
FMA1741A-ST 0 to 80 SLM range
FMA1742A-ST 0 to 100 SLM range
FMA1743A-ST 0 to 200 SLM range
FMA1744A-ST 0 to 500 SLM range
FMA1745A-ST  *0 to 1000 SLM range
Mass Flow Meters with Display, Aluminum/Brass Body
FMA1802A 0 to 10 SCCM range
FMA1804A 0 to 20 SCCM range
FMA1806A 0 to 50 SCCM range
FMA1808A 0 to 100 SCCM range
FMA1810A 0 to 200 SCCM range
FMA1812A 0 to 500 SCCM range
FMA1814A 0 to 1 SLM range
FMA1816A 0 to 2 SLM range
FMA1818A 0 to 5 SLM range
FMA1820A 0 to 10 SLM range
FMA1823A 0 to 15 SLM range
FMA1824A 0 to 20 SLM range
FMA1826A 0 to 30 SLM range
FMA1827A 0 to 40 SLM range
FMA1828A 0 to 50 SLM range
FMA1840A 0 to 60 SLM range
FMA1841A 0 to 80 SLM range
FMA1842A 0 to 100 SLM range
FMA1843A 0 to 200 SLM range
FMA1844A 0 to 500 SLM range
FMA1845A  * 0 to 1000 SLM range
Mass Flow Meters with Display, Stainless Steel Body
FMA1802A-ST 0 to 10 SCCM range
FMA1804A-ST 0 to 20 SCCM range
FMA1806A-ST 0 to 50 SCCM range
FMA1808A-ST 0 to 100 SCCM range
FMA1810A-ST 0 to 200 SCCM range
FMA1812A-ST 0 to 500 SCCM range
FMA1814A-ST 0 to 1 SLM range
FMA1816A-ST 0 to 2 SLM range
FMA1818A-ST 0 to 5 SLM range
FMA1820A-ST 0 to 10 SLM range
FMA1823A-ST 0 to 15 SLM range
FMA1824A-ST 0 to 20 SLM range
FMA1826A-ST 0 to 30 SLM range
FMA1827A-ST 0 to 40 SLM range
FMA1828A-ST 0 to 50 SLM range
FMA1840A-ST 0 to 60 SLM range
FMA1841A-ST 0 to 80 SLM range
FMA1842A-ST 0 to 100 SLM range
FMA1843A-ST 0 to 200 SLM range
FMA1844A-ST 0 to 500 SLM range
FMA1845A-ST 0 to 1000 SLM range
Accessories
FMA178BP  Portable battery pack for standard 12Vdc powered models only, with recharger for 115Vac
FMA178BP-220VAC  Portable battery pack for standard 12Vdc powered models only, with recharger for 220Vac
FMA178C  Female 9-pin D-connector with 3 ft of ribbon cable, 0 to 5 Vdc out
FMA178C-MA  Same as FMA178C, but for 4-20 mA output
FMA18RC10  10' cable for remotely locating LDC of FMA1800
FMA18RC25  25' cable for remotely locating LDC of FMA1800
Power Supplies
FMA178PW  Socket plug-in power supply for 110 Vac/12 Vdc, North American style plug
FMA178PW-24  Socket plug-in power supply for 110 Vac/24 Vdc, North American style plug
FMA178PW-240VAC-AU  Socket plug-in power supply for 240 Vac/12 Vdc, Australian style plug
FMA178PW-240V/24V-AU  Socket plug-in power supply for 240 Vac/24 Vdc, Australian style plug
FMA178PW-220VAC  Socket plug-in power supply for 230 Vac/12 Vdc, European style plug
FMA178PW-230V/24V-EU  Socket plug-in power supply for 230 Vac/24 Vdc, European style plug
FMA178PW-240VAC-UK  Socket plug-in power supply for 240 Vac/12 Vdc, U.K. style plug 
FMA178PW-240V/24V-UK  Socket plug-in power supply for 240 Vac/24 Vdc, U.K. style plug

Note: * Comes with dual 3/4 FNPT connections instead of compression fittings.
Comes complete with compression fittings, operator's manual, and NIST traceable certficate.
Power supplies sold separately.
Flow ranges specified are for nitrogen or air at 20 psig. When used for other gases, a multiplication factor is used to determine the flow rate, and the digital display must be rescaled in the field. To request a custom calibration add the gas abbreviation and pressure as a suffix to the model number.
Custom calibrations done at ambient temperature only.

產品型號說明
(1) (2) (3) (4)
FMA
A
Option Descriptions
(1) Display
Select
17 for Without Display
18 for With Display
(2) Max Flow Rate
Select
02 for 10 SCCM
04 for 20 SCCM
06 for 50 SCCM
08 for 100 SCCM
10 for 200 SCCM
12 for 500 SCCM
14 for 1 SLM
16 for 2 SLM
18 for 5 SLM
20 for 10 SLM
23 for 15 SLM
24 for 20 SLM
26 for 30 SLM
27 for 40 SLM
28 for 50 SLM
40 for 60 SLM
41 for 80 SLM
42 for 100 SLM
43 for 200 SLM
44 for 500 SLM
45 for 1000 SLM
(3) Body
Select
Nothing(leave field blank) for Aluminum/Brass Body
-ST for 316 SS Body
(4) Oxygen Cleaned Units
Select
Nothing(leave field blank) for None
-C for Oxygen Cleaned Units

FMA1716A-ST流量計 美國omega